EDS ELECTRONIQUE
>
Univers Electronique
>
Electronique (Domestique / Industrie)
>
chargeurs et Alimentations
>
Velleman
>
DR-100-24
chargeurs et Alimentations
Velleman DR-100-24
100W Single Output Industrial DIN Rail Power Supply 24V 4.2A
56,00€
écotaxe 0,08€
Prix EDS56,00€
Prix public
Tarif de livraison 8,00€
Garantie :
1 an(s)
Stock principalTemporairement indisponible
Notre indication de stock est remise à jour toutes les 24H. Nous vous garantissons un traitement rapide et un suivi exceptionnel. La livraison sous 5/10 jours signifie que le produit est en stock chez notre fournisseur.
Caractéristiques DR-100-24
Caractéristiques
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
Isolation class II
indicateur LED d'alimentation
No load power consumption<1W
100% full load burn-in test
3 years warranty
POUR L'USAGE PROFESSIONNEL
Cet appareil doit être installé par un technicien qualifié.
Spécifications
OUTPUT:
tension CC: 24V
courant nominal: 4.2A
plage de courant: 0 ~ 4.2A
RIPPLE & NOISE (max.) Note.2: 150mVp-p
plage de réglage de tension: 24 ~ 29V
VOLTAGE TOLERANCE Note.3: ±1.0%
régulation de ligne: ±1.0%
régulation de charge: ±1.0%
temps de démarrage, de montée: 2700ms, 80ms/230VAC 2700ms, 80ms/115VAC at full load
temps de maintien (typ.): 50ms/230VAC 18ms/115VAC at full load
rated power: 100 W
entrée:
plage de tension: 88-264VAC; 124-370VDC
FREQUENCY RANGE: 47 ~ 63Hz
rendement (typ.): 89%
courant CA (typ.): 3A/115VAC 1.6A/230VAC
courant d'appel (typ.): COLD START 30A/115VAC 45A/230VAC
protection:
OVERLOAD Note.6:
105 ~ 135% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE:
30 ~ 35V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE:
90°C ±15°C (RTH2) detect on heatsink of power transistor
Protection type : Shut down o/p voltage, re-power on to recover
environnement:
WORKING TEMP.: -20 ~ +60°C (Refer to "Derating Curve")
humidité de service: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85°C , 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/°C (0 ~ 50°C )
vibration: Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
486K
SAFETY & EMC (Note 4):
SAFETY STANDARDS: UL60950-1, TUV EN60950-1 approved, design refer to EN50178
tension d'isolation: I/P-O/P:3KVAC
ISOLATION RESISTANCE: I/P-O/P:>100M Ohms / 500VDC / 25°C / 70% RH
EMC EMISSION: Compliance to EN61204-3, EN55022 Class B, EN61000-3-2,-3
EMC IMMUNITY: Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
autres:
MTBF: 486K hrs min. MIL-HDBK-217F (25°C )
dimensions: 100 x 93 x 56mm
PACKING: 0.35Kg; 36pcs/13.6Kg/0.89CUFT
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
Isolation class II
indicateur LED d'alimentation
No load power consumption<1W
100% full load burn-in test
3 years warranty
POUR L'USAGE PROFESSIONNEL
Cet appareil doit être installé par un technicien qualifié.
Spécifications
OUTPUT:
tension CC: 24V
courant nominal: 4.2A
plage de courant: 0 ~ 4.2A
RIPPLE & NOISE (max.) Note.2: 150mVp-p
plage de réglage de tension: 24 ~ 29V
VOLTAGE TOLERANCE Note.3: ±1.0%
régulation de ligne: ±1.0%
régulation de charge: ±1.0%
temps de démarrage, de montée: 2700ms, 80ms/230VAC 2700ms, 80ms/115VAC at full load
temps de maintien (typ.): 50ms/230VAC 18ms/115VAC at full load
rated power: 100 W
entrée:
plage de tension: 88-264VAC; 124-370VDC
FREQUENCY RANGE: 47 ~ 63Hz
rendement (typ.): 89%
courant CA (typ.): 3A/115VAC 1.6A/230VAC
courant d'appel (typ.): COLD START 30A/115VAC 45A/230VAC
protection:
OVERLOAD Note.6:
105 ~ 135% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE:
30 ~ 35V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE:
90°C ±15°C (RTH2) detect on heatsink of power transistor
Protection type : Shut down o/p voltage, re-power on to recover
environnement:
WORKING TEMP.: -20 ~ +60°C (Refer to "Derating Curve")
humidité de service: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85°C , 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/°C (0 ~ 50°C )
vibration: Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6
486K
SAFETY & EMC (Note 4):
SAFETY STANDARDS: UL60950-1, TUV EN60950-1 approved, design refer to EN50178
tension d'isolation: I/P-O/P:3KVAC
ISOLATION RESISTANCE: I/P-O/P:>100M Ohms / 500VDC / 25°C / 70% RH
EMC EMISSION: Compliance to EN61204-3, EN55022 Class B, EN61000-3-2,-3
EMC IMMUNITY: Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
autres:
MTBF: 486K hrs min. MIL-HDBK-217F (25°C )
dimensions: 100 x 93 x 56mm
PACKING: 0.35Kg; 36pcs/13.6Kg/0.89CUFT
